Crown XLS402D Stereo Power Amplifier (400 Watts)
XLS series is a 2 unit rackmount. 400 watts at 4 ohms.
The XLS Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. The line consists of three models in a uniform, rugged chassis, incorporating the best of tried-and-true design principles and innovative features. XLS Series amplifiers are professional stereo power amplifiers engineered to meet demanding audio requirements; reliably and within budget. With over five decades of experience designing and building rock-solid products, Crown is the standard in amp technology. So check out the affordable, Crown XLS Series. They are a powerful argument for quality and value!
Features:
Reliable design incorporates many popular features
Selectable high-pass filter on each channel enables amplifier to work more efficiently when full bandwidth is not required
Pair of linear optocoupler clip limiters protects loudspeakers from being overdriven
Housed in a rugged, all-steel 2U chassis
Efficient forced-air fan prevents excessive thermal buildup
Electronically balanced XLR inputs and touch-proof binding post outputs
Features precision detented level controls, power switch, and 4 LEDs, which indicate clip for each channel, power and fault conditions
3-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
| Minimum Guaranteed Power per channel, both channels driven |
|||||
| XLS 202 | XLS 402 | XLS 602 | XLS 802 | XLS 5000 | |
| 1 kHz with 0.5% THD Stereo, 2 ohms (per ch.) Stereo, 4 ohms (per ch.) Stereo, 8 ohms (per ch.) Bridge-Mono, 8 ohms Bridge-Mono, 4 ohms |
-- 300W 200W 600W -- |
-- 450W 300W 900W -- |
-- 600W 380W 1,200W -- |
-- 800W 500W 1,600W -- *750W for 100V models |
2,500W** 1,800W* 1,100W* 3,600W* 5,000W** *with 0.1% THD **with 1% THD |
- Reliable design incorporates many popular features
- Housed in a rugged, all-steel 2U chassis (3U in the XLS 5000)
- Efficient forced-air fans prevent excessive thermal buildup
- Electronically balanced XLR inputs; touchproof binding post and Speakon® outputs
- Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel.
- Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
For product availability and pricing please contact your local dealer.
| Sensitivity (volts RMS) for full rated power at 4 ohms |
1.25 |
| Frequency Response (at 1 watt, 22 Hz - 20 kHz) | +0 dB, –1 dB |
| Signal to Noise Ratio below rated power (20 Hz to 20 kHz, inputs terminated) A-weighted, below rated power No weighting, below rated power |
> 100 dB > 95 dB |
| Total Harmonic Distortion (THD) at 1 full bandwidth power, from 20 Hz to 1 kHz | < 0.5% |
| Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –30 dB | < 0.3% |
| Damping Factor (8 ohm): 10 Hz to 400 Hz | > 200 |
| Crosstalk (below rated power) at 1 kHz at 20 kHz |
–75 dB –50 dB |
| Input Impedance (nominal) (balanced, unbalanced) |
20 kilohms, 10 kilohms |
| Load impedance Stereo Bridge mono |
4-8 ohms 8 ohms |
| AC Line Voltage and Frequency Configurations Available (± 10%) | 120 VAC 60 Hz 100 VAC 50/60 Hz 220 VAC 50 Hz 230-240 VAC 50 Hz |
| Ventilation | Flow-through ventilation from front to back |
| Cooling | Internal heat sinks with forced-air cooling |
| Air Volume Requirements (per minute per unit) |
80.15 ft3 (2.27 m3) |
| Dimensions: Width, Height, Depth | XLS 202, 402, 602, 802: EIA Standard 19"W (EIA RS-310-B) x 3.5” (8.9 cm) H x15.2" (38.6cm) D. XLS 5000: EIA Standard 19"W (EIA RS-310-B), 5.25” ( 13.3 cm) H x 15.5” (39.5 cm) D. |
| Net Weight, Shipping Weight | XLS 202: 23.0 lb (10.4 kg), 28.0 lb (12.7 kg) XLS 402: 25.7 lb (11.7 kg), 30.7 lb (13.9 kg) XLS 602: 29.0 lb (13.2 kg), 34.0 lb (15.4 kg) XLS 802: 35.5 lb (16.1 kg), 40.5 lb (18.4 kg) XLS 5000: 62.0 lb (27.7 kg), 74.0 lb (33.6 kg) |
