How to redeem your Crown Cash Rebate: Simply download the form and follow the instructions on the form to redeem your Crown Cash Rebate! (offer good only on purchases made in the U.S.A. and open to U.S. residents only.) Download Rebate Form (Adobe® Reader required to view) Rebate Form In English Rebate Form In Spanish Note: if you have difficulty opening the form in your browser, try right-clicking on the link and saving the file to your computer. Then open the form in Adobe Reader.

 

Crown XLS602A Stereo Power Amplifier (600 Watts)
XLS series is a 2 unit rackmount. 600 watts at 4 ohms.

The XLS Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. The line consists of three models in a uniform, rugged chassis, incorporating the best of tried-and-true design principles and innovative features. XLS Series amplifiers are professional stereo power amplifiers engineered to meet demanding audio requirementsÖreliably and within budget. Plus, every XLS Series amplifier is backed by Crown‰s unequaled 3-Year, No-Fault, Fully Transferable Warranty that covers everything. With over five decades of experience designing and building rock-solid products, Crown is the standard in amp technology. So check out the affordable, Crown XLS Series. They are a powerful argument for quality and value!

Features:
Reliable design incorporates many popular features

Selectable high-pass filter on each channel enables amplifier to work more efficiently when full bandwidth is not required

Pair of linear optocoupler clip limiters protects loudspeakers from being overdriven

Housed in a rugged, all-steel 2U chassis

Efficient forced-air fan prevents excessive thermal buildup

Electronically balanced XLR inputs and touch-proof binding post outputs

Features precision detented level controls, power switch, and 4 LEDs, which indicate clip for each channel, power and fault conditions

3-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications

Crown's 3-Year, Full, No-Fault Warranty
Crown offers a 3-Year, Full, No-Fault Warranty for every new Crown amplifierÖan unsurpassed industry standard. With this unprecedented No-Fault protection, your new Crown amplifier is warranted to meet or exceed original specifications for the first three years of ownership. During this time, if your amplifier fails, or does not perform to original specifications, it will be repaired or replaced at our expense. About the only things not covered by this warranty are those losses normally covered by insurance and intentional abuse. And the coverage is transferable should you sell your amplifier.

Technical Description
Power (1 kHz power):
2-ohm stereo (per channel): 8400W
4-ohm stereo (per channel): 600W
8-ohm stereo (per channel): 370W
8-ohm bridge mono: 1200W

The following applies to units in Stereo mode with 8-ohm loads and rated input sensitivity unless otherwise specified.

Performance
Sensitivity (volts RMS) for full rated power at 4 ohms: 1.26

Frequency Response (at 1 watt) 20 Hz to 20 kHz: ±0.75 dB

Phase Response (degrees at 1 watt)
at 10 Hz: š10.
at 20 kHz: +19.

Signal-to-Noise Ratio (20 Hz to 20 kHz)
A-weighted, below rated power: > 100 dB
No weighting, below rated power: > 95 dB

Total Harmonic Distortion (THD) at full bandwidth power, from 20 Hz to 1 kHz: < 0.5%

Intermodulation Distortion (IMD) (60 Hz and 7 kHz at 4:1) from full rated output to š40 dB: < 0.3%

Damping Factor (8 ohm) 10 Hz to 400 Hz: >200

Crosstalk (below rated power)
at 1 kHz: š82 dB.
at 20 kHz: š58 dB

Voltage Gain (at maximum output): 31 dB

Power
Load Impedance: Safe with all types of loads. Rated for 2 to 8 ohms in Stereo, 8 ohms in Bridge-Mono

AC Line Voltages Available (±10%): 120VAC, 60 Hz and 230VAC, 50 Hz

Controls
Level: 2 front-panel, black rotary level controls, one for each channel

Power: Front-panel switch; on when in the UP position

Circuit Breaker: Provides overload protection

Indicators
Clip: 2 front-panel red LEDs, 1 for each channel, illuminate when the channel‰s output signal is being overdriven

Power: Green front-panel LED indicates amplifier has been turned on and AC power is available

Fault: Yellow front-panel LED illuminates when amplifier is in protect mode. Also illuminates briefly during normal power-up when amplifier is first switched on.

Input/Output
Input Connectors: 1 per channel; back-panel 3-pin female XLR input connectors are provided.

Input Impedance: (nominally balanced, nominally unbalanced): 20 k ohms, 10 k ohms

Output Connectors: One 4-pole Speakon¬ connecotr and one pair of back-panel, 5-way binding posts per channel; accepts banana plugs, spade lugs or bare wire. (European models do not accept banana plugs.)

DC Output Offset (shorted input): ±10 millivolts

Output Signal: Stereo, unbalanced, 2-channel

Protection
XLS Series amplifiers provide extensive protection and diagnostic capabilities, including output current limiting, DC protection, circuit breaker, and special thermal protection for the unit‰s transformers.

Construction
Ventilation: Flow-through ventilation from front to back.

Cooling: Internal heat sinks with forced-air cooling for rapid, uniform heat dissipation.

Air Volume Requirements (per minute per unit): 80.15 ftñ (2.27 mñ)

Dimensions: EIA Standard 19 in. (48.3-cm) rack mount width (EIA RS-310-B), 3.5 in. (8.9-cm) height and 14 in. (35.6-cm) depth behind the mounting surface.

Weight
Net Weight: 27.2 lbs. (12.3 kg)
Shipping Weight: 32.2 lbs. (14.6 kg)
21 X 22 X 6 35Lbs