There’s never been a better time to get what you want. Built on more than 60 years of innovation and expertise, Crown’s XLS series of amplifiers sets the standard for performance and value. From its cutting-edge technology and design to its world-class reliability and performance, the XLS series gives you world-tour sound without the world-tour price – all backed by the best warranty in the business. And now for a limited time, Crown is making the XLS series even more affordable by offering powerful cash rebates on all XLS models. Experience the XLS series and you’ll hear what innovation sounds like. Crown’s XLS Series – Now’s the Time |
Crown XLS602D Stereo Power Amplifier (600 Watts)
XLS series is a 2 unit rackmount. 600 watts at 4 ohms.
The XLS Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. The line consists of three models in a uniform, rugged chassis, incorporating the best of tried-and-true design principles and innovative features. XLS Series amplifiers are professional stereo power amplifiers engineered to meet demanding audio requirementsÖreliably and within budget. Plus, every XLS Series amplifier is backed by Crown‰s unequaled 3-Year, No-Fault, Fully Transferable Warranty that covers everything. With over five decades of experience designing and building rock-solid products, Crown is the standard in amp technology. So check out the affordable, Crown XLS Series. They are a powerful argument for quality and value!
Features:
Reliable design incorporates many popular features
Selectable high-pass filter on each channel enables amplifier to work more efficiently when full bandwidth is not required
Pair of linear optocoupler clip limiters protects loudspeakers from being overdriven
Housed in a rugged, all-steel 2U chassis
Efficient forced-air fan prevents excessive thermal buildup
Electronically balanced XLR inputs and touch-proof binding post outputs
Features precision detented level controls, power switch, and 4 LEDs, which indicate clip for each channel, power and fault conditions
3-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
Crown's 3-Year, Full, No-Fault Warranty
Crown offers a 3-Year, Full, No-Fault Warranty for every new Crown amplifierÖan unsurpassed industry standard. With this unprecedented No-Fault protection, your new Crown amplifier is warranted to meet or exceed original specifications for the first three years of ownership. During this time, if your amplifier fails, or does not perform to original specifications, it will be repaired or replaced at our expense. About the only things not covered by this warranty are those losses normally covered by insurance and intentional abuse. And the coverage is transferable should you sell your amplifier.
Technical Description
Power (1 kHz power):
2-ohm stereo (per channel): 8400W
4-ohm stereo (per channel): 600W
8-ohm stereo (per channel): 370W
8-ohm bridge mono: 1200W
The following applies to units in Stereo mode with 8-ohm loads and rated input sensitivity unless otherwise specified.
Performance
Sensitivity (volts RMS) for full rated power at 4 ohms: 1.26
Frequency Response (at 1 watt) 20 Hz to 20 kHz: ±0.75 dB
Phase Response (degrees at 1 watt)
at 10 Hz: š10.
at 20 kHz: +19.
Signal-to-Noise Ratio (20 Hz to 20 kHz)
A-weighted, below rated power: > 100 dB
No weighting, below rated power: > 95 dB
Total Harmonic Distortion (THD) at full bandwidth power, from 20 Hz to 1 kHz: < 0.5%
Intermodulation Distortion (IMD) (60 Hz and 7 kHz at 4:1) from full rated output to š40 dB: < 0.3%
Damping Factor (8 ohm) 10 Hz to 400 Hz: >200
Crosstalk (below rated power)
at 1 kHz: š82 dB.
at 20 kHz: š58 dB
Voltage Gain (at maximum output): 31 dB
Power
Load Impedance: Safe with all types of loads. Rated for 2 to 8 ohms in Stereo, 8 ohms in Bridge-Mono
AC Line Voltages Available (±10%): 120VAC, 60 Hz and 230VAC, 50 Hz
Controls
Level: 2 front-panel, black rotary level controls, one for each channel
Power: Front-panel switch; on when in the UP position
Circuit Breaker: Provides overload protection
Indicators
Clip: 2 front-panel red LEDs, 1 for each channel, illuminate when the channel‰s output signal is being overdriven
Power: Green front-panel LED indicates amplifier has been turned on and AC power is available
Fault: Yellow front-panel LED illuminates when amplifier is in protect mode. Also illuminates briefly during normal power-up when amplifier is first switched on.
Input/Output
Input Connectors: 1 per channel; back-panel 3-pin female XLR input connectors are provided.
Input Impedance: (nominally balanced, nominally unbalanced): 20 k ohms, 10 k ohms
Output Connectors: One 4-pole Speakon¬ connecotr and one pair of back-panel, 5-way binding posts per channel; accepts banana plugs, spade lugs or bare wire. (European models do not accept banana plugs.)
DC Output Offset (shorted input): ±10 millivolts
Output Signal: Stereo, unbalanced, 2-channel
Protection
XLS Series amplifiers provide extensive protection and diagnostic capabilities, including output current limiting, DC protection, circuit breaker, and special thermal protection for the unit‰s transformers.
Construction
Ventilation: Flow-through ventilation from front to back.
Cooling: Internal heat sinks with forced-air cooling for rapid, uniform heat dissipation.
Air Volume Requirements (per minute per unit): 80.15 ftñ (2.27 mñ)
Dimensions: EIA Standard 19 in. (48.3-cm) rack mount width (EIA RS-310-B), 3.5 in. (8.9-cm) height and 14 in. (35.6-cm) depth behind the mounting surface.
Weight
Net Weight: 27.2 lbs. (12.3 kg)
Shipping Weight: 32.2 lbs. (14.6 kg)
21 X 22 X 6 35Lbs
