Crown XLS802D Stereo Power Amplifier 800 Watts
The XLS Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. The line consists of three models in a uniform, rugged chassis, incorporating the best of tried-and-true design principles and innovative features. XLS Series amplifiers are professional stereo power amplifiers engineered to meet demanding audio requirementsÖreliably and within budget. Plus, every XLS Series amplifier is backed by Crown‰s unequaled 3-Year, No-Fault, Fully Transferable Warranty that covers everything. With over five decades of experience designing and building rock-solid products, Crown is the standard in amp technology. So check out the affordable, Crown XLS Series. They are a powerful argument for quality and value!
Features:
Reliable design incorporates many popular features
Selectable high-pass filter on each channel enables amplifier to work more efficiently when full bandwidth is not required
Pair of linear optocoupler clip limiters protects loudspeakers from being overdriven
Housed in a rugged, all-steel 2U chassis
Efficient forced-air fan prevents excessive thermal buildup
Electronically balanced XLR inputs and touch-proof binding post outputs
Features precision detented level controls, power switch, and 4 LEDs, which indicate clip for each channel, power and fault conditions
3-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
Crown's 3-Year, Full, No-Fault Warranty
Crown offers a 3-Year, Full, No-Fault Warranty for every new Crown amplifierÖan unsurpassed industry standard. With this unprecedented No-Fault protection, your new Crown amplifier is warranted to meet or exceed original specifications for the first three years of ownership. During this time, if your amplifier fails, or does not perform to original specifications, it will be repaired or replaced at our expense. About the only things not covered by this warranty are those losses normally covered by insurance and intentional abuse. And the coverage is transferable should you sell your amplifier.
| Minimum Guaranteed Power per channel, both channels driven |
|||||
| XLS 202 | XLS 402 | XLS 602 | XLS 802 | XLS 5000 | |
| 1 kHz with 0.5% THD Stereo, 2 ohms (per ch.) Stereo, 4 ohms (per ch.) Stereo, 8 ohms (per ch.) Bridge-Mono, 8 ohms Bridge-Mono, 4 ohms |
-- 300W 200W 600W -- |
-- 450W 300W 900W -- |
-- 600W 380W 1,200W -- |
-- 800W 500W 1,600W -- *750W for 100V models |
2,500W** 1,800W* 1,100W* 3,600W* 5,000W** *with 0.1% THD **with 1% THD |
- Reliable design incorporates many popular features
- Housed in a rugged, all-steel 2U chassis (3U in the XLS 5000)
- Efficient forced-air fans prevent excessive thermal buildup
- Electronically balanced XLR inputs; touchproof binding post and Speakon® outputs
- Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel.
- Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
For product availability and pricing please contact your local dealer.
| Sensitivity (volts RMS) for full rated power at 4 ohms |
1.25 |
| Frequency Response (at 1 watt, 22 Hz - 20 kHz) | +0 dB, –1 dB |
| Signal to Noise Ratio below rated power (20 Hz to 20 kHz, inputs terminated) A-weighted, below rated power No weighting, below rated power |
> 100 dB > 95 dB |
| Total Harmonic Distortion (THD) at 1 full bandwidth power, from 20 Hz to 1 kHz | < 0.5% |
| Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –30 dB | < 0.3% |
| Damping Factor (8 ohm): 10 Hz to 400 Hz | > 200 |
| Crosstalk (below rated power) at 1 kHz at 20 kHz |
–75 dB –50 dB |
| Input Impedance (nominal) (balanced, unbalanced) |
20 kilohms, 10 kilohms |
| Load impedance Stereo Bridge mono |
4-8 ohms 8 ohms |
| AC Line Voltage and Frequency Configurations Available (± 10%) | 120 VAC 60 Hz 100 VAC 50/60 Hz 220 VAC 50 Hz 230-240 VAC 50 Hz |
| Ventilation | Flow-through ventilation from front to back |
| Cooling | Internal heat sinks with forced-air cooling |
| Air Volume Requirements (per minute per unit) |
80.15 ft3 (2.27 m3) |
| Dimensions: Width, Height, Depth | XLS 202, 402, 602, 802: EIA Standard 19"W (EIA RS-310-B) x 3.5” (8.9 cm) H x15.2" (38.6cm) D. XLS 5000: EIA Standard 19"W (EIA RS-310-B), 5.25” ( 13.3 cm) H x 15.5” (39.5 cm) D. |
| Net Weight, Shipping Weight | XLS 202: 23.0 lb (10.4 kg), 28.0 lb (12.7 kg) XLS 402: 25.7 lb (11.7 kg), 30.7 lb (13.9 kg) XLS 602: 29.0 lb (13.2 kg), 34.0 lb (15.4 kg) XLS 802: 35.5 lb (16.1 kg), 40.5 lb (18.4 kg) XLS 5000: 62.0 lb (27.7 kg), 74.0 lb (33.6 kg) |
