STANTON SMX.211
Features
* Crossfader Start.
* 2 line and 2 phono inputs.
* 2 band EQ and Gain control per channel.
*Cue section features cue level and cue pan.
* Mic input with 2 band EQ
* User replaceable faders
* Compact size
Technical Specifications |
|
Line inputs : |
2 (RCA), -10dB/47K ohm |
Phono inputs : |
2 (RCA), -50dB/47K ohm |
DJ mic input : |
1 (1/4"), -50dB/6K ohm |
Master output : |
1 (RCA), -10dB/47K ohm |
Mic Tone : |
+/-10dB (Hi, Low) |
Tone Control : |
+9/-26dB (Hi, Mid, Low) |
Headphone output : |
1 (1/4"), -3dB/33 ohms |
Frequency Response : |
20 Hz - 20 kHz, +/- 2dB |
Gain Control : |
0-20dB |
S/N Ratio: |
Less than 75dB |
T.H.D. : |
Less than 0.2% |
Dimensions : |
10 1/2"(L) x 9"(W) x 3 1/2"(D) 265mm(L) x 228mm(W) x 87mm(D) |
Weight : |
6.6 lbs (2.8 Kg) |
Stanton Magnetics, Inc. - Warranty Provision - Returns for Repairs or Replacement
WARRANTY
Through Stanton's authorized dealers, Stanton will, without charge, repair or replace, at the sole discretion of the entity responsible for making the repair or providing the replacement, any Stanton merchandise proved defective in material or workmanship for a period of one (1) year following the date of original purchase.
Exceptions to this warranty are as noted below:
The warranty for mechanical parts which are subject to wear and tear are limited to the earlier to occur of thirty (30) days following the date of original purchase or the following number of cycles: Faders - 15,000; Rotary potentiometers - 10,000; and Switches - 10,000.
Stanton will warrant all replacement parts and repairs for ninety (90) days from the date of original shipment. Repairs made necessary by reason of misuse, alteration, normal wear, or accident are not covered under this warranty.
STANTON WARRANTY INFORMATION:
All goods requiring warranty repair or replacement must be returned at the customer's expense to the authorized Stanton dealer from whom the merchandise was purchased. For purposes of purchases made via the Internet, the merchandise must be returned to the authorized Stanton dealer in the country where the authorized Stanton dealer which sold the merchandise to purchaser is located and not the authorized Stanton dealer in the country where the purchaser is located or the country in which the merchandise was received.
To initiate a warranty repair, you must contact Stanton directly at www.stantondj.com
Stanton assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the merchandise. Stanton's liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party, or product liability, and relating to the merchandise shall not exceed the price received by Stanton from your purchase of such merchandise. In no event will Stanton be liable for any special, incidental or consequential damages (including loss of use, loss of profit and claims of third parties) however caused, whether by the negligence of Stanton or otherwise. To the extent permitted by law and except as otherwise provided above, Stanton disclaims any express or implied warranties of merchantability or fitness for a particular purpose.
The above warranty provides you with specific legal rights. You may also have additional rights, which are subject to variation from state to state and country to country.
If there is a dispute regarding the warranty of merchandise that does not fall under the warranty conditions stated above, please include a written explanation with the merchandise when returned pursuant to the terms and conditions set forth herein.
Please register your product online at www.stantondj.com or mail your completed warranty card to:
Stanton Magnetics, Inc, 3000 SW 42 St. Hollywood, Florida 33312
