|
IMPORTANT INFORMATION REGARDING VESTAX DEALERS!!
Authorized Vestax Dealers:
Vestax offers a manufacturer's warranty for products purchased from its authorized dealers such as DJDeals.com. In addition, Vestax from time to time, offers rebates and other special opportunities for products purchased from its authorized dealers. Vestax does NOT offer a manufacturer's warranty for products purchased from anyone who is not an authorized dealer and it does NOT offer rebates or other special opportunities for products purchased from anyone who is not an authorized dealer. Anyone who buys a Vestax product from a non-dealer is buying a product that carries no warranty and is in no way guaranteed new from Vestax.
Unauthorized Dealers:
Vestax lists the authorized dealers that offer a full warranty & new product right on their website. Any website that offers Vestax products that is not listed on www.Vestax.com is not an authorized dealer.
Shipments outside the USA:
Vestax USA does not authorize any USA Vestax dealer to sell or ship any Vestax product outside the USA. Any dealer that agrees to ship a Vestax product outside the USA is not an authorized dealer, and the warranty will be immediately VOID on any product shipped outside the USA.
BUYING DIRECT FROM DJDeals.com GUARANTEES A FULL WARRANTY FROM VESTAX. WE ALSO GUARANTEE THE LOWEST PRICE IN THE WORLD ON EVERY VESTAX PRODUCT, NO OTHER DEALER ON EARTH HAS EVER BEEN CAPABLE OF OFFERING A LOWER PRICE TO CONSUMERS, PERIOD. |
VESTAX PMC-05 PRO III DX HIP-HOP MIXER
The world standard PMC-05Pro has evolved again. With additional input/output connection the PMC-05Pro3 DX can work with DJ software via audio interface, offers simple setup in clubs and enables DJs to switch their gear easily with other DJs. USB connection can be applied as an option by installing the TUB-1 USB board.
The rear panel has the same input/output features as the PMC-05Pro3 VCA, available for turntables and CD players.
Set the software control vinyl / CD to the player.
Connect the output on the front panel to the audio interfaces LINE input and the audio interfaces output to the PGM 1 / 2 input on the front panel. Turn each PGM DX switch ON and connect the audio interface to the computer.
DJs can switch their gear easily at clubs to the next DJ without stopping the sound by switching the PGM DX switch one by one.
The main control section is exactly the same as the HIP HOP / SCRATCH standard PMC-05Pro 3 VCA, which has well defined operability and reliability that outclass others.
The main control section is exactly the same as the HIP HOP / SCRATCH standard PMC-05Pro 3 VCA, which has well defined operability and reliability that outclass others.
The USB option board TUB-1 can be installed to the front panel in order to input audio signals via USB. The sound signal inputted via USB is assigned to PGM 1 by turning the DX switch and Option In switch ON. (Devices connected to INPUT PGM 1 on the front panel will have priority over USB)
The CF monitor control & Master level fader have been moved closer to the top in order to free up more battle space around the cross fader for dynamic scratches and moves.
The monitor sound can be selected from MASTER and CUE with the MONITOR SELECT SWITCH. Useful for monitoring before going on stage and practicing scratches on you own.
* As for the rear panel, the same input/output system as current PMC-05Pro3VCA that way is succeeded, connects the turntable and the CD player that way.
You stand by the PC DJ SOFTWARE private record and exclusive use CD.
You connect to IN PUT PGM1 and PGM2 which from output of private interface is front panel from OUT PUT which is the front panel of PMC-05Pro3DX in line in of private interface, turn each PGM DX SWITCH to ON. After if PC and private interface USB are connected, setting is completion.
* If also the baton pass to of next DJ on site, the one channel changes the PGM DX SWITCH each, it does not cause the sound being cut off, the smooth taking over is possible.
Basic operation system HIP fixed turn model PMC-05Pro3VCA of HOP/SCRATCH type operativity and the reliability which completely it is followed and are refined following of other things is not permitted.
The knob of being accurate, adopted the elastomer black knob which it can correspond to fast operation.
Also USB audio input is possible by the fact that “TUB-1” of option is loaded onto front panel. When OPTION IN which is common to the DX switch is set to ON, it is possible to take in to PGM-2. * When the external equipment is connected to INPUT PGM-2 of front panel, there takes precedence.
* Features below is common with PMC-05ProIII.
C.F.MONITOR position of and MASTER LEVEL arrangement the position where the case of scratch it does not become the disturbance. In addition the case where both is moved with one hand considering operativity, to make the interval of each short, improvement performance characteristic.
The monitor loading the MONITOR SELECT switch which it selects from MASTER CUE. Because before and the like the production, monitoring scratch inside the headphone, to do it is possible the time zone and, it is produced to practice the place in the air.
The common music source for DJs was once vinyl, which
shifted to CDs, and is now rapidly shifting to digital data
files. Every time the source changes, the mixer must live
up to its requirements, thus, connection with new
hardware.
The PMC-05Pro Mk3 DX is a professional DJ mixer
which comes with two independent line inputs and PGM
direct outs for parallel connection to computers and USB
audio devices. This enables the DJ to play with computer
software in addition of standard vinyl mixing & scratching
with a flick of the switch.
Each PGM channel is equipped with a direct out. Stable
control with no noise interference is promised when
scratching with a control signal record by sending signals
to USB audio devices, which are level adjusted and RIAA
equalized through the PMC-05Pro Mk3 DX's phono
amplifier.
The DJ can mix the output sound from the computer
individually, and switch between data control and standard
vinyl/CD play easily with the direct out switch and
independent line volume.
| * SPECS |
|
| Input (rear) |
LINE IN: -10dBV (RCA L/R) x 2
PHONO IN: -42dBV (1KHz) (RCA L/R) x 2
MIC IN: -54dBV (φ6.3PHONE) x 2 |
| Input (front) |
EFFECT RCV: -10dBV (RCA L/R) x 1
PGM 1 DX IN (RCA L/R) x 1
PGM 2 DX IN (RCA L/R) x 1 |
| Output (rear) |
MASTER OUT: -10dBV (RCA L/R) x 2
LINE OUT: -10dBV (RCA L/R) x 2 (PARA) |
| Output (front) |
EFFECT SEND: -10dBV (RCA L/R) x 1
PGM 1 DX OUT (RCA L/R) x 1
PGM 2 DX OUT (RCA L/R) x 1
HEADPHONE OUT: 160mW MAX (47Ω) (φ6.3PHONE) x 1 |
For exchange
[hueda] |
CF-PCV (including tax \ 7,350)
IF-05PCV (including tax \ 7,350) |
| Size/weight |
262 (W) x 106 (H) x 320(D) mm/4.0kg |
| Power source |
AC-14 |
| Electric power consumption |
7W |
VESTAX WARRANTY INFORMATION:
To initiate a warranty repair, you should contact Vestax USA directly at 800-994-4984
| 
